Paint Definitions
   Failing Paint on Windows
   Rusty Nails Bleeding
   Wood Knots Bleeding
   Dull Finish On Siding
   Mildew
   Garage Doors and Frames
   Breakdown with Many Coats
   Intercoat Peeling
   Peeling on Galvanized Metal
   Paint Blisters
   Iron Fences / Metal Doors
   Clear Urethanes Varnishes
   Staining
 
Contact
Student Works Painting
119 - 2455 Dollarton Highway
North Vancouver, BC V7H0A2
604.987.6110

FAX 604.987.6118
Toll Free 1-800-665-4992
request@studentworks.ca
 

National
Sponsor
National Member of Better Business Bureau (BBB)
"Thanks for a job well done. The price we paid was well worth the work done, and we really appreciate the fact that it was done in such a professional manner."
Ferdinando Di Lorezno
 

Home  >>>  About Us >>  Painting Problems  > Intercoat Peeling
Intercoat Peeling
 
It is common knowledge that a dirty surface should not be painted. Sometimes, an apparently clean surface is actually dirty. There are two sources of dirt. As paint ages, it oxidizes, and water soluble chemicals sit on the surface in the form of chalks and salts. Airborne pollutants such as sulphur also settle on your house's painted surfaces. Unfortunately the falling rain does not wash your house evenly, and these chemicals remain on covered areas such as porch ceilings and soffits. If they are painted over, the film of dirt, while very thin, will not allow the fresh paint to adhere firmly to the surface, and eventual peeling is certain.
 
To avoid this eventuality, we will thoroughly wash all covered areas of your home. Trisodium phosphate (TSP) or an environmentally friendly alternative is necessary to break down the chalks and salts. All covered areas of your home will be scrubbed, by hand, with TSP and hosed until clean. This will guarantee a clean surface, and proper paint adhesion.
 
If the last time your home was painted, it was not washed properly prior to coating application, you will experience "inter-coat peeling." Beneath the peeling paint is the previous coat of paint and not bare wood. The peeling between coats is not caused by moisture, but by a lack of adhesion resulting from paint application to a dirty surface. Should the peeling coat not be removed before repainting, the next coat would peel as surely as the existing one.

 
The Solution:
The solution to intercoat peeling is rather simple, involving a firm scraping and sanding, a thorough TSP (or more environmentally friendly alternative) wash, and a hose down. Once dry, the top coat may be applied. Although there may be some ridges in the finish coat due to uneven peeling in the previous coat, we can assure that the fresh coat of paint will hold, and guarantee it for three years.
 
Student Works Painting can ensure that your home will be thoroughly washed in order to avoid any unsightly intercoat peeling. We can also repair past errors, leaving a long lasting finish.